Order Line 
Next Day Delivery
After Sale Support
Talk to an expert
Wishlist
Wolf Dakota 100 14CFM 3HP 150psi Portable Air Compressor 100L
Order Code: 100128
Wolf Dakota 100 14CFM 3HP 150psi Portable Air Compressor 100L
Order Code: 100128
When you need a genuine 14CFM quiet well balanced twin cylinder, slow running, belt drive compressor powered by a mighty 3HP 230v single phase motor fitted onto a large 100 litre portable air ...
| £379 |
|
Description
When you need a genuine 14CFM quiet well balanced twin cylinder, slow running, belt drive compressor powered by a mighty 3HP 230v single phase motor fitted onto a large 100 litre portable air receiver, AND fitted with a Compressed Air aftercooler for Greater Compressed Air Delivery with a compressed air Efficiency, you need the Wolf Dakota 100 Industrial air compressor from the Wolf Air range.
This compressor displaces an impressive 397 litres/ Min (14CFM) from its heavy duty, in-line twin cast iron cylinder pump. For regular use around the garage or workshop, this fully portable machine operates up to a maximum pressure of 10 BAR (150psi). The Wolf Air Dakota 100 is fitted with after cooler for higher performance and efficiency making it ideal for car body refinishing, maintenance departments, engineering workshops etc and will handle a wide variety of air tools as well as paint spraying equipment.
Fitted with an air outlet pressure regulator and twin outlet 1/4 inch BSP Uni Hi Flow quick release connectors, the Wolf Air Dakota 100 air compressor is a must for professional workshops, garages and enthusiasts alike.
IMPORTANT NOTE:
These are Industrial motors which demand a high start-up power supply but should work satisfactorily from one of the following options:
Option #1: A 13amp plug and plugged into a standard 13amp socket on a 32amp Domestic Ring Main with no other significant power being drawn from that ring main whenever the compressor is in use.
Option #2: A 13amp dedicated power supply from the mains board.
Option #3: A 16amp dedicated power Supply from the mains board.
Well over 90% of users enjoy satisfactory service when operating the compressor in one of these ways.
In the event of a 13-amp fuse in the plug blowing, it will not be because there is a problem with the Compressor. It will be that that the motor is experiencing a voltage drop on start up or when it gets towards the higher pressures.
Power supply voltages vary around the Country and if the fuse blows when operating option #1 above, you may wish to try option #2 or better still use option #3 which will solve the matter.
Caution: Never run Compressors from an extension cable – this will cause operational difficulties and may even cause damage to your motor.
This compressor displaces an impressive 397 litres/ Min (14CFM) from its heavy duty, in-line twin cast iron cylinder pump. For regular use around the garage or workshop, this fully portable machine operates up to a maximum pressure of 10 BAR (150psi). The Wolf Air Dakota 100 is fitted with after cooler for higher performance and efficiency making it ideal for car body refinishing, maintenance departments, engineering workshops etc and will handle a wide variety of air tools as well as paint spraying equipment.
Fitted with an air outlet pressure regulator and twin outlet 1/4 inch BSP Uni Hi Flow quick release connectors, the Wolf Air Dakota 100 air compressor is a must for professional workshops, garages and enthusiasts alike.
IMPORTANT NOTE:
These are Industrial motors which demand a high start-up power supply but should work satisfactorily from one of the following options:
Option #1: A 13amp plug and plugged into a standard 13amp socket on a 32amp Domestic Ring Main with no other significant power being drawn from that ring main whenever the compressor is in use.
Option #2: A 13amp dedicated power supply from the mains board.
Option #3: A 16amp dedicated power Supply from the mains board.
Well over 90% of users enjoy satisfactory service when operating the compressor in one of these ways.
In the event of a 13-amp fuse in the plug blowing, it will not be because there is a problem with the Compressor. It will be that that the motor is experiencing a voltage drop on start up or when it gets towards the higher pressures.
Power supply voltages vary around the Country and if the fuse blows when operating option #1 above, you may wish to try option #2 or better still use option #3 which will solve the matter.
Caution: Never run Compressors from an extension cable – this will cause operational difficulties and may even cause damage to your motor.
Technical Specification
| Air Receiver Volume | 100 Litre |
| Air Displacement | 14 CFM |
| Max. Working Pressure (BAR/PSI) | 10 BAR / 150 PSI |
| Horse Power | 3 HP |
| Wattage | 2,200 Watts |
| Input Voltage | 230V |
| Oil / Oil Free | Oil Lubricated |
| Wheel Mounted | Yes |
| Air Outlets | Two 1/4 inch BSP Uni Hi Flow quick release connectors |
| Dimension LxWxH (mm) | 990 x 440 x 880 |
| Weight | 69 Kg |
FAQs
Will this compressor run from a normal 13 amp socket?
It will on some installations but because suitable conditions cannot be guaranteed we recommend a dedicated 30 or preferably 45 amp supply which will accommodate the motor starting current of 2 to 3 times the full load current of some 6,500 watts.
Will this compressor run a Dual Action Sander?
Yes, but the sander will take all the air delivered by the air pump, therefore, running continuously gradually dropping the air pressure.
It will on some installations but because suitable conditions cannot be guaranteed we recommend a dedicated 30 or preferably 45 amp supply which will accommodate the motor starting current of 2 to 3 times the full load current of some 6,500 watts.
Will this compressor run a Dual Action Sander?
Yes, but the sander will take all the air delivered by the air pump, therefore, running continuously gradually dropping the air pressure.