Wolf Dakota 150L Air Compressor & 13pc Air Tool Kit
Order Code: 102801
Wolf Dakota 150L Air Compressor & 13pc Air Tool Kit
Order Code: 102801
The choice of Garages, Tyre Fitting Bays and IndustryWhen you need a large single phase air compressor which is quiet running, has a well balanced twin cylinder, quiet slow running, belt drive pump ...
£519 |
|
Description
The choice of Garages, Tyre Fitting Bays and Industry
When you need a large single phase air compressor which is quiet running, has a well balanced twin cylinder, quiet slow running, belt drive pump which is driven by a mighty 3HP 230v single phase motor mounted on to a large 150 litre stationary air receiver, then you need the industrial Wolf Dakota 150 from the Wolf Air Professional Range.
This compressor displaces an impressive 397 litres/ Min (14CFM) from its heavy duty, in-line twin cast iron cylinder pump and works up to 150psi.
For regular use around the garage or workshop, this hard working machine operating up to 150psi will tackle all regular tasks in a busy garage or workshop from paint spraying to tyre changing and operating a wide range of popular air tools including Air Drills, Chisels, D/A Sanders, impact wrenches, ratchet nut runners etc. making the Wolf Dakota 150 the choice of professionals.
Fitted with an air outlet pressure regulator and twin outlet 1/4 inch BSP Uni Hi Flow quick release connectors, the Wolf Air Dakota 150 air compressor is a must for those needing a high performing, high-pressure stationary 230/240v air compressor for tough daily use – and with a full 2 year warranty, you can’t go wrong.
IMPORTANT NOTE:
These are Industrial motors which demand a high start up power supply but should work satisfactorily from the following:
Option #1: A 13amp plug and plugged into a standard 13amp socket on a 32amp Domestic Ring Main with no other significant power being drawn from that ring main whenever the compressor is in use
Option #2: A 13amp dedicated power spur
Option #3 A 16amp dedicated power spur
Well over 90% of users enjoy satisfactory service when operating the compressor in one of these ways.
In the event of a 13 amp fuse in the plug blowing, it will not be because there is a problem with the Compressor. It will be that that the motor is experiencing a voltage drop on start up or when it gets towards the higher pressures.
Power supply voltages vary around the Country and if the fuse blows when operating option #1 above, you may wish to try option #2 but better still use option #3 which will solve the matter.
Caution: Never run Compressors from an extension cable – this will cause operational difficulties and may even damage your motor.
Technical Specification Summary:
- Fully Automatic Stop / Start Pressure Switch Control
- Air Displacement: 14CFM
- Pump: Twin Cylinder, In Line, Belt Drive Pump
- Maximum Working Pressure 150psi
- Motor: 3HP, 230/240v Single Phase
- Air Receiver: 150 litres capacity
- Fitted: Air outlet pressure control regulator with gauge,
Air receiver pressure gauge,
Safety valve
Air receiver moisture drain valve.
- Outlets: 2 Air Outlets with Quick Release Couplers
- Approx Dimensions: L x W x H: 1400 x 475 x 890mm
- Weight approx: 81Kg
This 13pc Comprehensive Pro Air Tool Kit, comprising of:
- Professional syphon feed spray gun with 1 litre container and 2.5mm nozzle for rapid material coverage.
- Single clip on connector tyre inflator with inflation and deflation valves
- Long Nozzle Sprayer
- Blow Gun
- 8pc inflator set for bicycles, footballs, lilos etc.
- 5m length of air hose with quick release connectors.
- Requires a minimum of a 2.5HP air compressor.
Note: This item is extremely heavy and needs 2 people to assist the driver when unloading the delivery vehicle
When you need a large single phase air compressor which is quiet running, has a well balanced twin cylinder, quiet slow running, belt drive pump which is driven by a mighty 3HP 230v single phase motor mounted on to a large 150 litre stationary air receiver, then you need the industrial Wolf Dakota 150 from the Wolf Air Professional Range.
This compressor displaces an impressive 397 litres/ Min (14CFM) from its heavy duty, in-line twin cast iron cylinder pump and works up to 150psi.
For regular use around the garage or workshop, this hard working machine operating up to 150psi will tackle all regular tasks in a busy garage or workshop from paint spraying to tyre changing and operating a wide range of popular air tools including Air Drills, Chisels, D/A Sanders, impact wrenches, ratchet nut runners etc. making the Wolf Dakota 150 the choice of professionals.
Fitted with an air outlet pressure regulator and twin outlet 1/4 inch BSP Uni Hi Flow quick release connectors, the Wolf Air Dakota 150 air compressor is a must for those needing a high performing, high-pressure stationary 230/240v air compressor for tough daily use – and with a full 2 year warranty, you can’t go wrong.
IMPORTANT NOTE:
These are Industrial motors which demand a high start up power supply but should work satisfactorily from the following:
Option #1: A 13amp plug and plugged into a standard 13amp socket on a 32amp Domestic Ring Main with no other significant power being drawn from that ring main whenever the compressor is in use
Option #2: A 13amp dedicated power spur
Option #3 A 16amp dedicated power spur
Well over 90% of users enjoy satisfactory service when operating the compressor in one of these ways.
In the event of a 13 amp fuse in the plug blowing, it will not be because there is a problem with the Compressor. It will be that that the motor is experiencing a voltage drop on start up or when it gets towards the higher pressures.
Power supply voltages vary around the Country and if the fuse blows when operating option #1 above, you may wish to try option #2 but better still use option #3 which will solve the matter.
Caution: Never run Compressors from an extension cable – this will cause operational difficulties and may even damage your motor.
Technical Specification Summary:
- Fully Automatic Stop / Start Pressure Switch Control
- Air Displacement: 14CFM
- Pump: Twin Cylinder, In Line, Belt Drive Pump
- Maximum Working Pressure 150psi
- Motor: 3HP, 230/240v Single Phase
- Air Receiver: 150 litres capacity
- Fitted: Air outlet pressure control regulator with gauge,
Air receiver pressure gauge,
Safety valve
Air receiver moisture drain valve.
- Outlets: 2 Air Outlets with Quick Release Couplers
- Approx Dimensions: L x W x H: 1400 x 475 x 890mm
- Weight approx: 81Kg
This 13pc Comprehensive Pro Air Tool Kit, comprising of:
- Professional syphon feed spray gun with 1 litre container and 2.5mm nozzle for rapid material coverage.
- Single clip on connector tyre inflator with inflation and deflation valves
- Long Nozzle Sprayer
- Blow Gun
- 8pc inflator set for bicycles, footballs, lilos etc.
- 5m length of air hose with quick release connectors.
- Requires a minimum of a 2.5HP air compressor.
Note: This item is extremely heavy and needs 2 people to assist the driver when unloading the delivery vehicle
Technical Specification
Air Receiver Volume | 150 Litre |
Air Displacement | 14 CFM |
Max. Working Pressure (BAR/PSI) | 10 BAR / 150 PSI |
Horse Power | 3 HP |
Wattage | 2200 Watts |
Input Voltage | 230V |
Oil / Oil Free | Oil Lubricated |
Wheel Mounted | Yes |
Air Outlets | x2 1/4" BSP Uni Hi Flow quick release connectors |
Dimension LxWxH (mm) | 1400 x 475 x 890 |
Weight | 81 Kg |