Using a 10mm Keyless chuck, this lightweight and compact drill/driver from Wolf is so easy to use whether used for drilling into timber, plastics, or soft metals.

Fitted with 17 Torque settings, forward and reverse control and with a 2 speed gearbox, precise control is achieved every time.
When driving screws into timber, the selection of the appropriate torque setting allows single or repetitive screw driving to be performed without damage to the timber surface.

Being compact, the drill may be used in tight spots where most other drill cannot be used and when those tight spots are dark areas, the inbuilt bright LED light comes on at the squeeze of the trigger to focus on the work in hand.

This tool is always at your service whenever you need it.

Drill Specification:

// Rated Voltage: 12V
// Keyless Chuck: Ø10mm
// 2 Speed Gearbox:
Gear 1: 0 - 350rpm
Gear 2: 0 - 1300rpm
// Torque Settings: 17+1
// Maximum Torque: 16.7 Nm
// Maximum Drilling Diameter:
Wood: 13mm
Steel: 6mm

Impact Driver Specification:

// Rated Voltage: 12V
// Hex Chuck: 6.3mm (1/4”)
// No Load Speed: 0 - 2300rpm
// Maximum Torque: 100 Nm

//12V 1.5Ah Lithium Ion Battery
//Fast 1 Hour Charger


PLUS:
Buy now and get Wolf 1000pc Torx Screw  

// Torx Elite Wood Screws
// Torx compatible head for a higher transmission of power
// Patented self-drilling thread - No pilot hole needed
// Improved holding power from reinforced countersunk neck
// A sharp point for faster bite. Capable of penetrating 0.8mm steel
// Improved countersinking from recessed ribs
// Patented self-drilling thread for faster drive, reduced splitting and 'jacking' of the timber, increased pull-out and firmer fix
// Improved counter sinking
// 25% lower torque
// Firmer drive
// 20% faster
// Intelligent design
// Anti-corrosive, metal finish, suitable for interior use
// Environmentally friendly - does not contain Cr6
// Lasts up to 6 times longer than a standard zinc screw protective coating
// Salt spray tested to 400 hours

// Can be screwed directly into Hardwood, Softwood, MDF & Particleboard, Chipboard, Fibreboard, Laminates, Plywood, Plastics and PVCu

// Contains 1000 Pieces:

// 150 - 3.5 x 16mm
// 100 - 3.5 x 25mm
// 180 - 3.5 x 30mm
// 130 - 4.0 x 25mm
// 140 - 4.0 x 30mm
// 100 - 4.0 x 40mm
// 80 - 4.0 x 50mm
// 55 - 5.0 x 50mm
// 65 - 5.0 x 80mm
// 5 Bits: 2x T15, 2x T20, 1x T25