• Home
  • Wolf Wet and Dry Bench Grinder

Wolf Wet and Dry Bench Grinder


Order Code: 110058


Wolf Wet and Dry Bench Grinder

Order Code: 110058



There are tools and equipment in the workplace that need to be sharpened to a much finer degree than that which a dry fine grit stone can achieve, they need to be “honed!” Items such as: woodworking ...




£39
  • .95
  • INC VAT


Next Day Delivery Available


Description

There are tools and equipment in the workplace that need to be sharpened to a much finer degree than that which a dry fine grit stone can achieve, they need to be “honed!” Items such as: woodworking chisels, planer blades, butchers, grocers and domestic knives to name but a few, need this treatment.

Wolf in their range of Bench Grinders has included a combined Wet and Dry Bench Grinder.

This superbly designed and manufactured machine uses a dry 150mm x 20mm wide 36 grit stone to rejuvenate a worn cutting edge; follow this by honing on the 200mm x 40mm wide Wet 80 grit stone, result a razor sharp cutting edge.

The robust build of this die cast alloy machine is powered by a strong 230v 250w 2950rpm induction motor fitted within an alloy cast housing and supported at both ends of the spindle shaft by roller bearings fitted in the end case and gearbox case journals. A specification plate is fitted above the on/off switch.

The spindle end on the left is threaded to securely fit the grinding wheel by means washers and a nut. The right hand spindle is keyed to the primary gear in the gearbox.

Power is transferred to the wet stone through the reduction gearbox giving a slow gentle honing speed of 135rpm and the stone running in a water trough lubricates and cools the stone and work piece.

Anti-vibration rubber mountings are supplied and holes are drilled in the base to accommodate fitting to a bench or other suitable surface.

A Pressed steel guard is situated around the grinding wheel and consists of an inner plate which stays in place but the outer is removable to facilitate stone replacement or service. An adjustable see through eye shield is fitted; a stepped tool rest is moulded in to the water trough.

Wolf has produced a most versatile and powerful combination Wet and Dry Bench Grinder / Honing Machine giving excellent value for money.

Technical Specification:
- Motor: 250W Induction Motor
- No Load Speed: 135rpm Whetstone / 2950 rpm                           
- Coarse Grinding Stone: ( Dry Stone) 150mm dia. x 20mm (Spindle: 12.7mm dia.) – 36 grit
- Fine Honing Stone:  200mm dia. x 40 mm (Spindle: 20mm dia.) – 80 grit
- Protective Eye Shield for Dry stone
- Tool Rest for Dry stone 
- Water Tank for Whetstone
- Instructions

2 years warranty

SPARE 150mm” dia. grinding wheels and 200mm dia. Whetstone Honing wheels stocked!

Description

There are tools and equipment in the workplace that need to be sharpened to a much finer degree than that which a dry fine grit stone can achieve, they need to be “honed!” Items such as: woodworking chisels, planer blades, butchers, grocers and domestic knives to name but a few, need this treatment.

Wolf in their range of Bench Grinders has included a combined Wet and Dry Bench Grinder.

This superbly designed and manufactured machine uses a dry 150mm x 20mm wide 36 grit stone to rejuvenate a worn cutting edge; follow this by honing on the 200mm x 40mm wide Wet 80 grit stone, result a razor sharp cutting edge.

The robust build of this die cast alloy machine is powered by a strong 230v 250w 2950rpm induction motor fitted within an alloy cast housing and supported at both ends of the spindle shaft by roller bearings fitted in the end case and gearbox case journals. A specification plate is fitted above the on/off switch.

The spindle end on the left is threaded to securely fit the grinding wheel by means washers and a nut. The right hand spindle is keyed to the primary gear in the gearbox.

Power is transferred to the wet stone through the reduction gearbox giving a slow gentle honing speed of 135rpm and the stone running in a water trough lubricates and cools the stone and work piece.

Anti-vibration rubber mountings are supplied and holes are drilled in the base to accommodate fitting to a bench or other suitable surface.

A Pressed steel guard is situated around the grinding wheel and consists of an inner plate which stays in place but the outer is removable to facilitate stone replacement or service. An adjustable see through eye shield is fitted; a stepped tool rest is moulded in to the water trough.

Wolf has produced a most versatile and powerful combination Wet and Dry Bench Grinder / Honing Machine giving excellent value for money.

Technical Specification:
- Motor: 250W Induction Motor
- No Load Speed: 135rpm Whetstone / 2950 rpm                           
- Coarse Grinding Stone: ( Dry Stone) 150mm dia. x 20mm (Spindle: 12.7mm dia.) – 36 grit
- Fine Honing Stone:  200mm dia. x 40 mm (Spindle: 20mm dia.) – 80 grit
- Protective Eye Shield for Dry stone
- Tool Rest for Dry stone 
- Water Tank for Whetstone
- Instructions

2 years warranty

SPARE 150mm” dia. grinding wheels and 200mm dia. Whetstone Honing wheels stocked!

Customer Reviews