Wolf 8" Bench Grinder


Order Code: 110057


Wolf 8" Bench Grinder

Order Code: 110057



No workshop is complete without a Bench Grinder!Wolf as a Tool manufacturer for over a century is so aware of this and hence their range of bench grinders which are professionally designed to be ...




£27
  • .98
  • INC VAT


Next Day Delivery Available


Description

No workshop is complete without a Bench Grinder!


Wolf as a Tool manufacturer for over a century  is so aware of this and hence their range of bench grinders which are professionally designed to be operated in workshops, maintenance departments as well as garages and ideal for home users.


A cast alloy body of flat front design houses a 230v 350w induction motor, providing sufficient power for the work this type of machine is put to. The centre motor spindle protrudes from both sides of the central housing and is supported on ball bearings in the side casing journals; the spindle ends are threaded to fix the 6”grinding wheels with dished clamping washers and nuts. The front face has a specification plate above the on/off switch.


Steel safety guards are mounted around both wheels and each consists of inner plate which stays in place but the outer is removable to facilitate stone replacement or service. 


Whilst the stones are balanced to themselves in manufacture grinding wheels have to be “Trued by dressing” on the grinder. 


The grinding wheels have lead centres to allow for ‘truing’ with a dressing wheel or a scrap piece of bar steel to ensure that the initial wheel wobble is removed. (This is a bench grinder’s equivalent of wheel balancing).


See through Eye shields are fitted to the front top of the guards to protect the eyes ( although we do recommend that a pair of CE approved safety specs should also be worn when using any grinding tool).
The Tool rests bolted to the inner guards and are adjustable to suit the job in hand.


Anti-vibration mountings and bench fixing holes are provided enabling the grinder to be bolted to a bench or stand.
Supplied with two grinding wheels 200mm diameter, 20mm wide, bore 16mm; coarse 36 grit & medium 60 grit.


Technical Specification:
- Motor: 350W Induction Motor
- No Load Speed: 2950rpm
- Med Grinding Stone: 200mm dia  x 20mm – 60 grit
- Coarse Grinding Stone: 200mm dia.  x 20mm – 36 grit
- Spindle bore 16mm dia
-  2 x Protective Eye Shields
-  2 x Tool Rests                                                                                                                                   
2 years  warranty

SPARE 200 mm dia Grinding wheels stocked!


Never keep blunt or dull tools ever again, use the Wolf grinder and get to work straightaway!

Description

No workshop is complete without a Bench Grinder!


Wolf as a Tool manufacturer for over a century  is so aware of this and hence their range of bench grinders which are professionally designed to be operated in workshops, maintenance departments as well as garages and ideal for home users.


A cast alloy body of flat front design houses a 230v 350w induction motor, providing sufficient power for the work this type of machine is put to. The centre motor spindle protrudes from both sides of the central housing and is supported on ball bearings in the side casing journals; the spindle ends are threaded to fix the 6”grinding wheels with dished clamping washers and nuts. The front face has a specification plate above the on/off switch.


Steel safety guards are mounted around both wheels and each consists of inner plate which stays in place but the outer is removable to facilitate stone replacement or service. 


Whilst the stones are balanced to themselves in manufacture grinding wheels have to be “Trued by dressing” on the grinder. 


The grinding wheels have lead centres to allow for ‘truing’ with a dressing wheel or a scrap piece of bar steel to ensure that the initial wheel wobble is removed. (This is a bench grinder’s equivalent of wheel balancing).


See through Eye shields are fitted to the front top of the guards to protect the eyes ( although we do recommend that a pair of CE approved safety specs should also be worn when using any grinding tool).
The Tool rests bolted to the inner guards and are adjustable to suit the job in hand.


Anti-vibration mountings and bench fixing holes are provided enabling the grinder to be bolted to a bench or stand.
Supplied with two grinding wheels 200mm diameter, 20mm wide, bore 16mm; coarse 36 grit & medium 60 grit.


Technical Specification:
- Motor: 350W Induction Motor
- No Load Speed: 2950rpm
- Med Grinding Stone: 200mm dia  x 20mm – 60 grit
- Coarse Grinding Stone: 200mm dia.  x 20mm – 36 grit
- Spindle bore 16mm dia
-  2 x Protective Eye Shields
-  2 x Tool Rests                                                                                                                                   
2 years  warranty

SPARE 200 mm dia Grinding wheels stocked!


Never keep blunt or dull tools ever again, use the Wolf grinder and get to work straightaway!

Customer Reviews