• Home
  • Wolf Professional Dakota 90L Air Compressor with 10m Rubber Air Hose

Wolf Professional Dakota 90L Air Compressor with 10m Rubber Air Hose


Order Code: 103594


Wolf Professional Dakota 90L Air Compressor with 10m Rubber Air Hose

Order Code: 103594



* Colour of the rubber air hose may vary.When you need an air compressor which has a well balanced twin cylinder, quiet, slow running, belt drive pump powered by a mighty 3HP 230v single phase motor ...




£379
  • .99
  • INC VAT

Free Delivery

Next Day Delivery Available


Description

* Colour of the rubber air hose may vary.

When you need an air compressor which has a well balanced twin cylinder, quiet, slow running, belt drive pump powered by a mighty 3HP 230v single phase motor and mounted onto a large 90 litre portable air receiver, you need the Wolf Dakota 100 from the Wolf Air range.

This compressor displaces an impressive 397 litres/ Min (14CFM) from its heavy duty, in-line twin cast iron cylinder pump. For regular use around the garage or workshop, this fully portable machine operates up to a maximum pressure of 10 BAR (150psi). The Wolf Air Dakota 100 is ideal for car body refinishing, maintenance departments, engineering workshops etc and will handle a wide variety of air tools as well as paint spraying equipment. 

Fitted with an air outlet pressure regulator and twin outlet 1/4" quick release couplers, the Wolf Air Dakota 100 air compressor is a must for professional workshops, garages and enthusiasts alike. 

IMPORTANT NOTE:

These are Industrial motors which demand a high start up power supply but should work satisfactorily from the following:

Option #1: A 13amp plug and plugged into a standard 13amp socket on a 32amp Domestic Ring Main with no other significant power being drawn from that ring main whenever the compressor is in use

Option #2: A 13amp dedicated power spur

Option #3 A 16amp dedicated power spur

Well over 90% of users enjoy satisfactory service when operating the compressor in one of these ways. 

In the event of a 13 amp fuse in the plug blowing, it will not be because there is a problem with the Compressor. It will be that that the motor is experiencing a voltage drop on start up or when it gets towards the higher pressures. 

Power supply voltages vary around the Country and if the fuse blows when operating option #1 above, you may wish to try option #2 but better still use option #3 which will solve the matter.

Caution: Never run Compressors from an extension cable – this will cause operational difficulties and may even damage your motor.

This Kit includes Wolf Air 10m Rubber Air Rose.

Technical Specification

Air Receiver Volume90 Litre
Air Displacement14 CFM
Max. Working Pressure (BAR/PSI)10 BAR / 150 PSI
Horse Power3 HP
Wattage2,200 Watts
Input Voltage230V
Oil / Oil FreeOil Lubricated
Wheel MountedYes
Air OutletsTwo 1/4"
Dimension LxWxH (mm)990 x 440 x 880
Weight69 Kg

FAQs

Will this compressor run from a normal 13 amp socket?
It will on some installations but because suitable conditions cannot be guaranteed we recommend a dedicated 30 or preferably 45 amp supply which will accommodate the motor starting current of 2 to 3 times the full load current of some 6,500 watts.

Will this compressor run a Dual Action Sander?
Yes, but the sander will take all the air delivered by the air pump, therefore, running continuously gradually dropping the air pressure.

Description

* Colour of the rubber air hose may vary.

When you need an air compressor which has a well balanced twin cylinder, quiet, slow running, belt drive pump powered by a mighty 3HP 230v single phase motor and mounted onto a large 90 litre portable air receiver, you need the Wolf Dakota 100 from the Wolf Air range.

This compressor displaces an impressive 397 litres/ Min (14CFM) from its heavy duty, in-line twin cast iron cylinder pump. For regular use around the garage or workshop, this fully portable machine operates up to a maximum pressure of 10 BAR (150psi). The Wolf Air Dakota 100 is ideal for car body refinishing, maintenance departments, engineering workshops etc and will handle a wide variety of air tools as well as paint spraying equipment. 

Fitted with an air outlet pressure regulator and twin outlet 1/4" quick release couplers, the Wolf Air Dakota 100 air compressor is a must for professional workshops, garages and enthusiasts alike. 

IMPORTANT NOTE:

These are Industrial motors which demand a high start up power supply but should work satisfactorily from the following:

Option #1: A 13amp plug and plugged into a standard 13amp socket on a 32amp Domestic Ring Main with no other significant power being drawn from that ring main whenever the compressor is in use

Option #2: A 13amp dedicated power spur

Option #3 A 16amp dedicated power spur

Well over 90% of users enjoy satisfactory service when operating the compressor in one of these ways. 

In the event of a 13 amp fuse in the plug blowing, it will not be because there is a problem with the Compressor. It will be that that the motor is experiencing a voltage drop on start up or when it gets towards the higher pressures. 

Power supply voltages vary around the Country and if the fuse blows when operating option #1 above, you may wish to try option #2 but better still use option #3 which will solve the matter.

Caution: Never run Compressors from an extension cable – this will cause operational difficulties and may even damage your motor.

This Kit includes Wolf Air 10m Rubber Air Rose.

Technical Specification

Air Receiver Volume90 Litre
Air Displacement14 CFM
Max. Working Pressure (BAR/PSI)10 BAR / 150 PSI
Horse Power3 HP
Wattage2,200 Watts
Input Voltage230V
Oil / Oil FreeOil Lubricated
Wheel MountedYes
Air OutletsTwo 1/4"
Dimension LxWxH (mm)990 x 440 x 880
Weight69 Kg

FAQs

Will this compressor run from a normal 13 amp socket?
It will on some installations but because suitable conditions cannot be guaranteed we recommend a dedicated 30 or preferably 45 amp supply which will accommodate the motor starting current of 2 to 3 times the full load current of some 6,500 watts.

Will this compressor run a Dual Action Sander?
Yes, but the sander will take all the air delivered by the air pump, therefore, running continuously gradually dropping the air pressure.

Customer Reviews